Surface Mounted Multiple-Point Panic Exit Deadbolt Lock

SECTION 08700 DOOR HARDWARE

Part 2 - Products

2.01 - Materials and Manufacturers

Locksets and Latches

1. Lockset shall be heavy duty type in function, trim and finish as specified.
2. Emergency Exit Lock

a. Emergency exit security deadlock shall be Securitech Model #4945, a surface mounted four-point deadbolt system with an emergency exit paddle on the interior which instantly retracts all moving deadbolts with one depression of the paddle. One 360º key revolution from the exterior side, where listed on the hardware schedule, shall project or retract all the moving deadbolts. The lockset shall be capable of installation on a door 3’x7’ or less.

b. Moving deadbolts shall project a minimum of one full inch in each direction. The upper deadbolt shall be hardened steel and shall be a minimum five inches long. The lock side and vertical bolts shall be moving. A fixed bolt shall be affixed to the edge of the door for a fourth locking point.

c. The lock shall be located at the lock edge of the door, installed at a height of approx. 42-1/2 inches. The vertical deadbolts shall travel within aluminum channels which are affixed to the door by steel locking brackets which are affixed to the door with four self-drilling bolts per bracket.

Exterior operation and guard plate shall be as designated in the hardware schedule. Alarm function shall be as designated in the hardware schedule.
All alarms are to contain an anti-tamper switch which will sound the alarm if the special alarm cover screw is removed without shunting or turning off the alarm.
All cylinders are to be supplied by others. See separate keying information.

Specific model information:

Locking Points:
49__ = Securitech MP Panic Exit Police Lock Series
45 = 4 locking points
35P= 3 locking points on each leaf of a pair of doors
31= 3 locking points (top & bottom moving, fixed hinge bolt)
32= 3 locking points (horizontal & top moving, fixed hinge bolt)
33= 3 locking points (horizontal & bottom moving, fixed hinge bolt)
34= 3 locking points (horizontal, top & bottom moving)
21 = 2 locking points (top & bottom moving)
22= 2 locking points (horizontal & top moving)
23= 2 locking points (horizontal & bottom moving)