Easy to Order or Specify High Security Exits.
PANIC EXIT DEADLOCK SYSTEM
EASY MODEL NUMBER CREATOR
8--3--C--47----GG-- AC---SBO----630---LHR
--ALL AUTO-BOLT &
--P*E*D*S MODELS
--BEGIN WITH "8"
NUMBER
OF DEAD
BOLTS

1= Single Point
2= 2 Point Locking
2V_= 2 Point Vertical

 3= 3 Point Locking
4= 3 Moving & _Fixed Bolt On _Hinge Side
  INTERIOR TYPE
(C=Cross Bar)
  EXTERIOR TRIM
TYPE (See Below)
EXT-
TRIM
STYLE
(For
Lever
Models)
ELECTRIC RELEASE TYPE
(For
Electric Lever
Models)

SPECIAL FEATURES:
(Surface-Bolt Option, Hurricane Doors, Top Trigger, Keyed Dogging, Cylinder Dogging)
FINISH:
Lever Models:
(Int. & Ext.) Panic Bar: (Ext. Finish)


DOOR SWING:
Auto-Bolt Locks Are Handed-Use LH, LHR, RH Or RHR
Designate "F" after Trim# for Fire-Rated Models-
Omit fields not required for specific trims when creating model number
EXTERIOR OPTIONS

#44 Lever Handle
#47 With Electric Release UG Or GG Styles
#41
Passage Lever Handle

#12
Pull Handle

No Cylinder (Use With KDM)

 #13
Pull Handle
#24
Pull Handle
Secur-igaurd

#28
Knurled Alumi-num Pull Plate
Secu-rigaurd

#11
No Exterior Trim

No Cylinder
#55DX2
Lever Handle
Digital Keypad Entry & Lockout
#55DX2
With Electric Release
#55PB
Lever Handle

Push-button Entry
#56PB With Electric Release
#26

Lever
Handle
Securiguard
#95 With Electric Release
#18
Thumb
-Turn
GG Trim available for #44
47 & 41 models

CUSTOM FUNCTIONS& MODELS AVAILABLE:
CONTACT THE FACTORY WITH YOUR SPECIAL NEEDS
Additional Ordering Information:
Finishes: UG: 676 (Powder Coat Black) GAG: 626 or 605. All interior panic bars are stainless steel.
Mortise Cylinders For Exterior Trim: Min. 1-1/8" Required. Cylinders & cams are not furnished by Securitech.
Cam Info: Standard Function - Cloverleaf (Carbine wing-type). Classroom Function - Short Adams-Rote type.
Cam For #55 & #56 Models (DX & PB): Straight Yale type.
Cylinders for Pull Handle & Pull Plate models require special "Gear Cam" provided by
Securitech. Removable-core or special high-security cylinders should be sent to Securitech for "Gear Cam" mounting.
Specify door thickness if other tab 1-3/4. Specify door width and height.
Notify factory if using removable core cylinder when ordering "UG" trim for special cylinder protector.
Electric release available in 24vAC or 24vDC. Ac models require 30va transformer or power supply.
All Securitech MP Alarms are available for use with P*E*D*S exit devices.
Exit Device
C= Cross Bar
  Fire-Rated Exit Device
TOP TRIGGER MODELS
-A special top trigger (in place of the trigger below the horizontal deadbolt) is available for use on doors with multi-point locking which are openly exposed to the general public and where there is a high likelihood of mis-use (such as rear exit doors in public housing). This is also used on pairs of doors.
EDGE PLATES
Doors which have inverted U-channels do not require special edge preparations, as they will use the elevated edge plate which fits into the channel. A flat edge plate is available for wood doors or flush HM doors.-
VANDAL-RESISTANT
"Slip-Off"
Pull Handle

Standard
With
UG & GG

Hardened Steel Cylinder Protects On Both units
Lever Will "Breakaway" If Forced, But Does Not Unlock Door. Lever Can Be Simply Reset By Lifting Back To Original (Horizontal) Position.



"Slip-Off"
Pull Handle

Spoils Attempts To Rip The Door From The Frame By Tying A Chain To The Lever And Pulling With A Car. Pull Handle Will Separate From Guard Plate If Forced.

Website material and images are Copyright © 2004 By Securitech Group. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Website Optimization and Design By Cornerstone Website Services.