Multi-Door Alarm For MP4900

Securitech's multi-door alarm allows a facility to monitor the status of their exit doors and have the alarm sound at a central (or staffed) location. This is especially useful where exit doors are located at an unsupervised location within a large space. A siren at the door may not be enough to alert staff that someone has voilated the door and exited.

49DPS-5 is ideal for retail and other large facilities. A powerful 110db siren sounds when any door has been opened. Individule LEDs on the front of the alarm box indicate which particular door has been opened. An optional LED ans/or siren is available at the individule door.

To silence and activated door alarm, a key must be inserted into the key switch cylinder located at the door. The door may be relocked manually, however, the alarm will sound until reset by key.
.
49DPS-5 Product Information
Green LED indicates
"Power ON"

Red LEDs individual
alarm activity indicator

Elements

  • 110db siren
  • Ac "Power On" LED
  • Recharging Battery
  • LED activity indicator per door
  • Tamper Switch
  • Key switch for power supply
    (Shunts power supply when opening)
Note: Not shown, "tamper switch", located behind cover (sounds alarm when power supply is forced open) and "Key switch" located on side of power supply and used to silence "tamper" alarm.
Dimentions: 7-1/2" w x 8" h x 3-1/2"d
Construction: Steel, Painted
Siren: 110db
Battery Back-up: Rechargable 12vDC GelCel
Installation Requirements:
Power: 110v, direct power
Mounting: 4 screws at location to be determined
Max Distance: 1,000 ft. to door module
Wires: 18 guage wires run to each door module
 
Ordering Information:
Order one 49DPS-5 per location to accomodate up to 5 doors. One #49DM1 is needed for each door to be used in the system and is supplied with a key switch box as part of the exit lock.
Optional Alarm System Output
If a facility has a central alarm system, 49DPS-5A includes an output for the alarm system
Mounting Information
Select a location (e.g. near a manager's office, on the selling floor, near cashier) where the siren can be heardand the LEDs indicating door lock status can be observed.
Key Switch & Individual Door Module
Ag3 (ordered as part of exit lock)
*Includes #49DM1 Module
*Momentary key switch silences alarm
*To be used with 49DPS-5 power supply
*Optional LED Indicator to show
alarm is activated
AG3-OA-
*Optional siren at door

49DM1 is mounted with junction box above door (Junction box by others) Contains circuit board and optional LED and door siren output.
Models:
49DM1 Standard door module
--------L With LED at door
--------S With siren at door
--------LS With LED and siren at door