|
|
| |
| Multi-Door
Alarm For MP4900 |
|
|
|
|
|
Securitech's multi-door alarm allows
a facility to monitor the status of their exit doors
and have the alarm sound at a central (or staffed)
location. This is especially useful where exit doors
are located at an unsupervised location within a
large space. A siren at the door may not be enough
to alert staff that someone has violated the door
and exited.
49DPS-5 is ideal for retail and
other large facilities. A powerful 110db siren sounds
when any door has been opened. Individual LEDs on
the front of the alarm box indicate which particular
door has been opened. An optional LED and/or siren
is available at the individual door.
|
|
To silence and activated
door alarm, a key must be inserted into the key switch cylinder
located at the door. The door may be relocked manually,
however, the alarm will sound until reset by key.
.
|
| 49DPS-5 Product
Information |
|
Green
LED indicates
"Power ON"
Red LEDs individual
alarm activity indicator
|
|
|
|
Elements
- 110db
siren
- Ac
"Power On" LED
- Recharging
Battery
- LED
activity indicator per door
- Tamper
Switch
- Key
switch for power supply
(Shunts power supply when opening)
|
|
| Note:
Not shown, "tamper switch", located behind
cover (sounds alarm when power supply is forced
open) and "Key switch" located on side
of power supply and used to silence "tamper"
alarm. |
Dimensions:
7-1/2" w x 8" h x 3-1/2"d
Construction: Steel, Painted
Siren: 110db
Battery Back-up: Rechargeable 12vDC GelCel |
Installation
Requirements:
Power: 110v, direct power
Mounting: 4 screws at location to be determined
Max Distance: 1,000 ft. to door module
Wires: 18 gauge wires run to each door module |
Ordering Information:
Order one 49DPS-5 per location to accommodate up to 5
doors. One #49DM1 is needed for each door to be used in
the system and is supplied with a key switch box as part
of the exit lock.
Optional Alarm System Output
If a facility has a central alarm system, 49DPS-5A
includes an output for the alarm system
Mounting Information
Select a location (e.g. near a manager's office, on the
selling floor, near cashier) where the siren can be heard
and the LEDs indicating door lock status can be observed. |
.
| Key
Switch & Individual Door Module |
|
|
Ag3
(ordered as part of exit lock)
*Includes #49DM1 Module
*Momentary key switch silences alarm
*To be used with 49DPS-5 power supply
*Optional LED Indicator to show
alarm is activated
AG3-OA-
*Optional siren at door |
|
|
49DM1 is mounted with junction
box above door (Junction box by others) Contains
circuit board and optional LED and door siren
output.
Models:
49DM1 Standard door module
--------L With
LED at door
--------S With
siren at door
--------LS With
LED and siren at door
|
|
|
One door module needed for either single
or double opening
.
|
|
