|
|
| |
|
LX
Series Trim Information |
|
|
|
SPECIAL
FEATURES & OPTIONS
|
Slip
Cutch Lever Handle (UG & GG) Stands up to abuse;
Will break-away when forced; Easily reset by just lifting
up.
Stainless Steel Lever
Durable, rugged one-piece construction. Meets ADA code.
Electric Release With The Trim
Unlock the lever momentarily by card access, keypad
intercom, pushbutton or other release.
Electromagnet Release Option
Unlocking and depressing lever will also cut power to
electromagnet.
See Electrolatch or Maglatch catalog cuts for electrical
and cut-off switch information.
|
|
Dual
Point Cylinder Holder
The cylinder is fastened to the trim with locking arms
extending into each groove of the cylinder.
Universal Acceptance
Will work with almost any panic device which can be
unlocked by rim cylinders. Contact factory for other
models.
Fail-Secure & Fail-Safe Models
All trims are fail-secure (remains locked in the event
of power failure) except "RE" models. "RE"
models will become fail-safe (lever allows free entry)
in the event of power failure or signal from the fire
alarm system.
|
|
|
Trim
Functions
|
Standard
(Single Entry - ANSI F09)
Key unlocks lever momentarily. Removing key relocks
lever. Typical function for use with access control
systems.
Classroom
Function (ANSI F08)
Key unlocks lever for extended period, until
key is used to re-lock lever. Lock functions
in passage mode while exterior lever is in unlocked
mode.
Key Usage
Switch
Sends a signal when key is used to unlock the
door as opposed to the door being released by
an access control system. For use with monitored
doors.
Access Control
Cut-Off Switch
Access control systems can be complicated to
program and turn on and off. Frequently a computer
is needed to change status, time zones, etc.
The cut-off switch feature allows a clockwise
rotation of the key to toggle the access control
system on or off. The supervisor does not need
to have any programming skills to turn the system
off for a defined period (after hours, weekend,
etc.) or turn it back on.
|
|
Electric
Release Options
|
|
LX
Series Trim are ideal for integrating existing
exit devices with access control systems. Electric
release trim, as opposed to electric latch retraction
panic bars, do not require special high in-rush
power supplies.
|
|
AC
|
24vAC,
30va transformer required |
|
DC
|
24vDC
transformer required |
|
RE
|
24vDC,
fail-safe re-entry function |
|
|
Special
Mounting Plates
|
LX
Series trim mounting plates are designed
to match exit device templates for easy
field installation.
Securitech has several standard mounting
plates which may be used and are identified
by exit device mfr. And model number.
Some designations are listed on the following
page; contact Securitech for full details. |
|
|
| "Y1"
plate (left) allows "GG" trim
to retrofit to "Yale" rim devices,
even on narrow style doors. |
|
|
Cylinder
Protector (UG Trim)
|
Hardened
Steel Protector
Resists drilling, prying & wrenching |
|
Full
face steel cylinder protector is standard
for regular cylinders. |
|
-RC
|
|
-YC
|
|
|
|
"BEST"-type
IC core cylinders require a figure "8"
plug opening |
|
Yale
IC core cylinders require an oval keyhole
opening. |
|
|
Cylinder
Information
|
|
|
Standard
1-1/8" - 1¼" mortise cylinders
are recommended. Specify if longer cylinders
are to be used for special collars or cylinder
protectors. Cloverleaf cam is used for single-entry
function. Short Adams-Rite type cam is required
for classroom function. |
|
. |
|
|
