LX Series Trim Information - SPECIAL FEATURES & OPTIONS
Slip Cutch Lever Handle (UG & GG) Stands up to abuse; Will break-away when forced; Easily reset by just lifting up.

Stainless Steel Lever
Durable, rugged one-piece construction. Meets ADA code.

Electric Release With The Trim
Unlock the lever momentarily by card access, keypad intercom, pushbutton or other release.

Electromagnet Release Option
Unlocking and depressing lever will also cut power to electromagnet.
See Electrolatch or Maglatch catalog cuts for electrical and cut-off switch information.

Dual Point Cylinder Holder
The cylinder is fastened to the trim with locking arms extending into each groove of the cylinder.

Universal Acceptance
Will work with almost any panic device which can be unlocked by rim cylinders. Contact factory for other models.

Fail-Secure & Fail-Safe Models
All trims are fail-secure (remains locked in the event of power failure) except "RE" models. "RE" models will become fail-safe (lever allows free entry) in the event of power failure or signal from the fire alarm system.
Trim Functions
Standard (Single Entry - ANSI F09)
Key unlocks lever momentarily. Removing key relocks lever. Typical function for use with access control systems.

Classroom Function (ANSI F08)
Key unlocks lever for extended period, until key is used to re-lock lever. Lock functions in passage mode while exterior lever is in unlocked mode.

Key Usage Switch
Sends a signal when key is used to unlock the door as opposed to the door being released by an access control system. For use with monitored doors.

Access Control Cut-Off Switch
Access control systems can be complicated to program and turn on and off. Frequently a computer is needed to change status, time zones, etc. The cut-off switch feature allows a clockwise rotation of the key to toggle the access control system on or off. The supervisor does not need to have any programming skills to turn the system off for a defined period (after hours, weekend, etc.) or turn it back on.
Electric Release Options
LX Series Trim are ideal for integrating existing exit devices with access control systems. Electric release trim, as opposed to electric latch retraction panic bars, do not require special high in-rush power supplies.
AC
 24vAC, 30va transformer required
DC
 24vDC transformer required
RE
 24vDC, fail-safe re-entry function
Special Mounting Plates
LX Series trim mounting plates are designed to match exit device templates for easy field installation.
Securitech has several standard mounting plates which may be used and are identified by exit device mfr. And model number.

Some designations are listed on the following page; contact Securitech for full details.
"Y1" plate (left) allows "GG" trim to retrofit to "Yale" rim devices, even on narrow style doors.
Cylinder Protector (UG Trim)
Hardened Steel Protector
Resists drilling, prying & wrenching
Full face steel cylinder protector is standard for regular cylinders.
-RC
  
-YC
  
"BEST"-type IC core cylinders require a figure "8" plug opening
Yale IC core cylinders require an oval keyhole opening.
Cylinder Information
Cloverleaf Cam
Standard 1-1/8" - 1¼" mortise cylinders are recommended. Specify if longer cylinders are to be used for special collars or cylinder protectors. Cloverleaf cam is used for single-entry function. Short Adams-Rite type cam is required for classroom function.