5000 Series Multi-Point
Lever Mortise Locksets
• Make sure when ordering
5000 series door hardware you send in door dimensional
sheet-Click
here for download
Follow steps
1 to 3 below to download the templates you will need for
your 5000 Series lock
STEP 1-Pick the templates you need for
the internal rods. This depends on the type of door you
have (wood or metal) and the intended use (security or
windstorm-fema / tornado / hurricane).
5000 Internal Rods for wood doors-
5XXX-DB-WD
5000 Internal Rods for hollow
metal doors(security)-5XXX-DB-HM
5000 Internal Rods for hollow
metal doors (Windstorm-FEMA)-5XXX-DB-IHD
STEP 2-Next
make sure frame is prepped for metal grout box where bolt(s)
will engage frame. Download that template here-5000
Grout Box Info click here
STEP 3-Pick
the Group of trim type you are using (Lever, pull etc)
then the function lock.
Locks with Lever trims
F10, F12, F13, -5X11
F10, F12, F13
F07M-5X11
F07
F09M, F13E, F14M-5411-F09M,
F14M
F18-5XXX-F18
Keyed Flushbolt-2-Vertical
bolts only
F16-52XXVF16
F17- 52XXVF17
F18-52XXVF18
Locks with #70 Pull
trims No Trim- Deadbolts Only (No Latch)
F18-5X70-F18
F16-5XXX-F16
F17-5XXX-F17
F18-5XXX-F18
Optional extra locking
points
HOVE
Dimensional Page
5XXX-DB-HM-HOVE-2
(specify where in edge)
NOTE:
PLEASE DO NOT USE ANY OF THE PRINTED TEMPLATES AS A DOOR
MARKING TEMPLATE. THE TEMPLATES ARE NOT TO SCALE. USE
THE DIMENSIONS ON THE TEMPLATE AS YOUR GUIDE TO PREPARE
THE DOOR.
