Single Door Alarm 100 Series
Custom Models To Meet Specific End-User Needs
AVAILABLE MODELS INCLUDE:
•
 SDA-101
Basic model, no strobe
•
 SDA-103
Includes strobe
•
 SDA-104
Includes strobe & timer to stop alarm after 30 seconds
•
 SDA-105
Includes strobe & output to remote alarm panel
•
 SDA-12_
Substitutes 85db siren for 110db siren

SDA-103
Alarm Power Supply, Siren & Strobe With Battery Back-Up
Width: 7-1/2"
Height Box: 8 - 1/4"
Strobe: 2"
Total: 10-1/4"
Depth: 3-1/2"
 

Key Switch Box
Width: 2-7/8"
Height: 4-1/2"
Depth: 3-1/2"
Mortise cylinder required (by others)
Surface Mounted Alarm Contacts (NC) are also furnished. If the mounting wall for the Alarm Power Supply (APS) is drywall, we recommend running the alarm contact wire within the drywall and entering the APS through the rear.
110vAC is required for direct connection into the Alarm Power Supply
The armored cable is shipped connected to the Key Switch Box. Approx. 48" of cable is provided. It is field installed to the terminal strip within the Alarm Power Supply Unit.

SDA-104
Identical to SDA-103, except alarm shuts off and resets after 30 seconds.

SDA-105
Identical to SDA-103 with additional alarm output (12vDC) to alarm panel and additional input (N.O.) for reset from alarm panel.

SDA-105A
Identical to SDA-103 with additional output (N.O.) to alarm panel and additional input (N.O.) for reset from alarm panel.

SDA-103-DPA
Identical to SDA-103 with field adjustable door-prop alarm. Alarm is shunted by use of card reader. If door remains continuously open for 20 seconds, alarm will sound until reset. Time frame (20 seconds) is field adjustable.

SDA-101
Identical to SDA-103, except does not include strobe