 |
|
|
Stainless
Steel Top & Bottom Internal Channels
|
|
 |
Elevated Edge Plate |
|
|
|
|
Latch bolt
by lever either side.
Deadbolts by key outside and turnpiece inside.
When deadbolts are projected, latch bolt
is deadlocked and outside lever is locked.
|
|
A turn of inside lever retracts latch deadbolts
simultaneously, automatically unlocking
outside lever. |
|
See page D5 for complete
ordering information |
|
Hurricane-Tornado
Door Model #5411-IHD-F13
|
•
|
Special protection
against high wind conditions and break-ins in one lockset |
|
•
|
4-Point locking;
primary, top and bottom movable deadbolts |
|
•
|
Stationary
bolt on hinge side of door |
|
•
|
Extra
long, 5/8" diameter stainless steel top and bottom
deadbolts with 1" projection |
|
•
|
Stainless
steel top and bottom internal channels with welded elevated
edge plates to reinforce door and vertical bolts |
|
•
|
Accepts
1-1/4" length mortise cylinders of all manufacturers |
|
•
|
One
motion locks or un-locks all the deadbolts |
|
•
|
Fits
into standard mortise openings |
|
•
|
Exterior
lever contains "LeverEx" slip-clutch system |
|
Designed
for use with doors designed & tested for same
purpose
|
DOOR PREPARATION:
Specially reinforced Vertically-Stiffened Hollow Metal recommended.
1-1/4" X 8" mortise opening. U-Channels on top and
bottom for elevated edge plates. Hinge-side bolt is not
connected to the lock mechanism.
FRAME PREPARATION:
4-7/8" Strike standard. Dustproof strike standard. Strike
holes in header and hinge side to be field-drilled and strike
plates are not required.
HANDING:
Order LH, RH, LHR or RHR |
