| 52XXV-F16 |
Double
cylinder
Keyed both sides |
|
| 52XXV-F17 |
Single
cylinder
Keyed exterior; thumbturn interior |
|
| 52XXV-F18 |
Single
cylinder
Keyed exterior; no interior operation |
|
"V"
- Designates vertical bolt only model (no horizontal deadbolt).
Custom modesl available upon request. Securitech does not
provide cylinders. |
|
Key
Lockable Flushbolts
Operated By A Single Cylinder
Usage
Functions as "lockable" flushbolts on inactive leaf
of a pair of doors. Turning key or turnpiece projects of retracts
both vertical deadbolts simultaneously. May nt be used in
fire-rated openings.
Door Information
Preparation: ANSI Mortise Opening (1-1/4" X 8").
Face hole for cylinder(s) only as per function. Strike prep
on this door may be required for lock from active leaf. Check
primary lock requirements.
Cylinder Location: 50" from bottom of opening,
or as needed so as not to interfere with locks and hardware
on active leaf. Cylinder(s) by others.
Height Adjustment: Vertical bolts are connected to
the lock body by threaded rods. Rod length can be cut-down
in the field, if needed. Supplied standard for a 7' door.
Specify height for taller doors.
Type: Vertically Stiffened Hollow Metal recommended.
5" min. from edge of door to first stiffener. Vertical
rods travel between edge of door and stiffener.
Top & Bottom Edges: "U" Channel recommended.
Removable cap for top of exterior doors. Holes for edge plates
can be field drilled and do not require factory templating.
Header Strike: Not required. Hole to be field drilled
and smoothed.
Dustproof Strike: Supplied for field installation into
floor or saddle.
Cylinder Information
| Standard
mortise cylinder required (by others). |
 |
Cloverleaf
cam ("wing-type") required.
Notify factory of special requirements (e.g. high-security
or removable core cylinders) |
|
|
