How does the 5000 Series work on various door types?
Multi-Point Locking Door & Frame Information

Current templates are available at www.securitech.com
SURFACE-MOUNTED LOCKS
•
 4800 & 4900 Models
--No factory prep required for lock or frame
•
 5000 or 8000 locks with "SBO"
----- (Surface Bolt Option)
--Standard ANSI lock prep (1-1/4" X 8")
--Standard ANSI strike prep (4-7/8")
--For all 8000 locks and 5000 locks with primary bolt

Non-Prepared Vertically Stiffened Hollow Metal Doors
Elevated edge plates fit within U-channel. Holes for vertical deadbolts may be field drilled. Elevated edge plates are pop-riveted within channel.

Elevated edge plate fits into U-channel.
Factory prep not required for vertical bolts if the door has U-channels.
OR
 
OR
Top & Bottom Sealed Caps On Hollow Metal Doors
Standard edge plate
1-1/8" X 2-1/4" preparation required at proper backsets

Edge plate for factory prepared doors
Top Frame Prep
None required. Hole may be field drilled. Optional strike pre: 1-1/8 X 2-3/4" at appropriate backset.

Field-Drilled

Optional Prep

For Prepared Door
or Wood Doors
Requires
Door prep:
1-1/8" X 2-1/4"
(for edge plate with bolt)
and
Frame prep:
1-1/8" X 2-3/4"
(for strike plate)
For Non-Prepared Door
or Wood Doors
No prep required.
All holes are filed drilled.
(See photo)
HINGE SIDE STATIONARY BOLTS FOR INTERNALLY MOUNTED LOCKS
Hinge side bolts are not connected to the lock mechanism.
The door swings away from the frame. The bolt does not have to retract as it moved out of the frame by the door movement.

Website material and images are Copyright © 2004 By Securitech Group. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Website Optimization and Design By Cornerstone Website Services.