The 5000 Series is easy to Specify. Pick the lock body, function, trim and your done.
Multi-Point Mortise Locks

Popular Multi-Point Mortise Lock Functions
F13
Entrance
Latch bolt by lever either side.

Deadbolts by key outside and turnpiece inside.

When deadbolts are projected, latch bolt is
deadlocked and outside lever is locked.

A turn of inside lever retracts latch deadbolts simultaneously, automatically unlocking outside lever.
F13E
Special Classroom

Latch bolt by lever either side.

Deadbolts by key outside and key inside.

When deadbolts are projected, latch bolt is
deadlocked and outside lever is locked.

A turn of inside lever retracts latch deadbolts simultaneously, automatically unlocking outside lever.
F07M
Storeroom
Latch by lever inside and key outside

Outside lever always rigid.
F09M
 
Latch bolt by lever either side unless locked by key.
When deadbolts are projected, outside lever is locked. Interior lever always allows exiting.
F14M
Stockroom

Deadbolt by key either side.

Both outside and inside
levers are locked when deadbolt is projected
F10
 
Latch bolt by key outside and lever either side unless outside lever is
locked by toggle-action stop.

Deadbolt by key outside and turnpiece inside.

F12
 
Latch bolt by lever either side unless outside lever is locked by toggle-action stop or projecting deadbolt.

Deadbolt by key outside and turnpiece inside.
Turning inside latch retracts latch bolt and deadbolt simultaneously. Outside latch remains locked.

Auxiliary latch deadlocks latch bolt and prevents manipulation of locked toggle-action stop.
Deadbolt-Only Functions
F18
Deadbolt by key outside. No inside operation.
F17
Deadbolt by key outside and turnpiece inside.
F16

Deadbolt by key either side.
-----------Specify 52XXV-F__ for vertical deadbolt only models
Vandal-Resistant Trim
#11-Lever
•
 ADA compliant
•
 Separate lever springs in trim to prevent sagging
•
 Thru-bolted
•
 Internal slip-clutch in lever
•
 Satin chrome or satin brass standard finishes
Custom functions available to meet specific requirements
Pull Handle Trim
Used for special security applications, such as psychiatric seclusion rooms. Also used with deadbolt-only functions. Stainless steel trim & pull.
Cam Information
"Wing-type" cloverleaf cam is required for proper operation.

Additional Information
CYLINDERS:
Securitech mortise locks will work with cylinders from most manufacturers (standard or high-security). See cam requirements.
KEYING:
If mortise cylinders are supplied by Securitech (ordered separately), keyed different (KD) standard. Available keyed alike (KA), masterkeyed or grand masterkeyed are available.
DOOR PREPARATION:
(5" is needed from edge of door for lock installation)
Vertically-stiffened hollow metal recommended.
1-1/4" X 8" mortise opening. U-channels on top and bottom for elevated edge plates. Hinge-side bolt is not connected to the lock mechanism.
FRAME PREPARATION:
4-7/8" strike standard. Dustproof strike standard. Strike holes in header and hinge side to be field-drilled. Strike plates not required.
HANDING:
Order LH, RH, LHR or RH

 How to Order:
53
A,B
11
C
-
F12
D
-
LH
E
-
605
F
-
HM
G
-
P
H
-
___
I,J

A)
 Mortise lock series
B)
 # of moving deadbolts
1 = Primary bolt only
2 = Top and bottom bolts only (no
-----primary bolt)
3 = Primary, top and bottom deadbolts
C)
 Trim: 11 = Vandal-resistant lever
12, 13, or 14 on special order
XX = No trim (deadbolt-only models)
70 = Pull handle trim
D)
 ANSI function number
E)
 Door swing (Handing): LH, LHR, RH, RHR
F)
 ANSI finish number
G)
 Door type
H)
 Frame (P=Prepared, N=Retrofit, W=Wood)
I)
 Door height (if over 7')
J)
 Special keying info, special cylinder, etc.

Website material and images are Copyright © 2004 By Securitech Group. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Website Optimization and Design By Cornerstone Website Services.