The delayed egress system is ideal for
retrofit. Use the existing hardware and
add this kit.
Electromagnetic Locks
INVISALOCK
Delayed Egress System # IL101

Delayed Egress locking has never been easier!

The Invisalock Delayed Egress System (#IL101 or #IL102) has been designed to let you keep your existing exit device on the door. Both systems integrate with your fire alarm system, but works independently of your panic bar. That's why we call it the Invisalock.

From single latch exit devices to multi-point deadbolt exit locks, INVISALOCK provides delayed egress wherever allowed by code.

LOCAL CODES
Always review current local, state and federal codes to ensure compliance.
AVAILABLE SYSTEMS
IL101: NFPA Compliant (15 sec. delay)
IL102: BOCA Compliant (30 sec. delay)
FLEXIBILITY
INVISALOCK systems are independent of the exit device. Should codes or requirements change, INVISALOCK can be added or removed without affecting the exit device!
Systems IL101 Include

Panic bar is existing or
supplied by others
Electromagnetic Lock with:
1,200 lb. holding force
Built-in motion sensor switch
Built-in door position switch

2 Plug-in Transformers
Outlets required

 
Door Exit Sign

Control Panel Console with:

Programmable keypad

2 Tone audible alarm with separate tones for Egress countdown & alarm

System status LEDs

24 Hour programmable clock

Continuous charging battery
Multiple terminals for remote signaling outputs & remote door release

Mounting box for surface or flush mount use

Everything needed to install IL101 or IL102
comes right in the box.

Outstanding Features
Transformers plug-in to standard outlet: No special wiring required.
Control Panel Console mounts on standard 3 gang box; all wiring to/from box is low voltage.
Keypad at door for programming time zones, days of week for flexible usage.
Keypad allows authorized exit or entry at door: Separate keyswitch for entry or exit available as alternative method.
3 second nuisance delay prior to complete 15 second audible countdown on IL101 (30 seconds on IL102)
System status LEDs on console
3 Form C dry relay contacts for remote signaling

Installation Requirements
Triple gang box adjacent to door (interior)
Double outlet in secure location within 50 ft. of door
Pair of wires from fire alarm system
Conduit or wire mold from gang box to frame (for magnet)
Optional Elements
EML1020 Double Electromagnetic Lock (for active pairs of doors)
CHN1010 Channel to conceal electromagnetic lock (single)
CHN1020 Channel to conceal electromagnetic lock (double)
EKP101 Exterior keypad (for entry)
EKS101 Exterior key switch (for entry)
AC1014 Remote annunciator/control panel (with LEDs)

Website material and images are Copyright © 2004 By Securitech Group. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Website Optimization and Design By Cornerstone Website Services
.