Special Power & Signal Wire Transfer
For Access Control Applications
TransX™

How Does It Work?

TransX transfers multiple wires from the door to the frame in a concealed, protected manner. Lock installers bring their wires through the door into the TransX door module. They snake the wire through to the frame module and make their connections on the bottom side of the terminal strip.

Access control technicians or electricians bring their low voltage wires through conduit into the TransX frame module and connect to the upper side of the terminal strip.
MODELS
PTB-106
 Includes 6 position terminal strip
PTB-108
 Includes 8 position terminal strip
PTB-110
 Includes 10 position terminal strip
PTB-112
 Includes 12 position terminal strip
PTB-106
 Includes 6 position terminal strip
-TS
 Add a tamper switch to the frame module
-DPS
 Adds a door position switch; indicates if door is open
-RH or -LH
 Units are handed; see illustration below
For right hand or left
hand reverse doors
For left hand or right
hand reverse doors
The Clean And Easy Way To Transfer Wires From The Door To The Frame

Today's sophisticated electric locking and access control systems include more wires in the locks and trim. TRANSX™ provides a method to bring those wires invisibly from the door to the frame. The wires are concealed within modules applied to the door and frame and travel within a steel channel between the modules.

TRANSX™ is designed for installation on doors with standard full mortise hinges.

Long lead wires from the control trim and or lock body eliminate wire connections within the door. Pull the long leads through the TransX door module into the frame module and make connections there.

Trouble shoot the electronics without removing the hardware from the door. All the connections are at the frame module. Remove the frame module cover and test connections.

The frame module cover has a lip which extends under the header. This prevents removal of the cover or access to the terminal strip while the door is closed. Tamper switches are available.

Everyone makes their own connections…nobody touches the other person's wires.


Wire connections and trouble shooting is easy…the terminal strip is mounted on a swinging arm which rotates outward for easy wire termination.

Dimension info
 
Depth
Width
Height
Frame Module:
2"
5-1/4"
2-3/4"
Door Module:
1-1/2"
3-3/4"
2-5/8"

TransX is designed for installation above standard 4-½" hinges. Shims might be required based upon different hinge types.