How
Does It Work?
Re-Entry
locksets fill the need where a door needs to be secured during
normal operation, but also is needed as a means of escape
or refuge in the event of an emergency. Many building codes
mandate re-entry every fourth floor in a high-rise building.
|
|
| All Securitech
Re-Entry locksets provide fail-safe exiting at all times.
The exterior trim is typically locked, released by key or
access control system interface during normal operation. The
power supply is connected to the fire alarm system. In the
event of an emergency, the fire alarm system interrupts the
power supply and the exterior trim unlocks. The door remains
latched in place to maintain the fire rating, but entry is
possible (Fail-safe entry). |
| |
|
| • |
Electrolatch |
| • |
Maglatch |
| • |
Auto-Bolt |
| • |
Exit Device |
| • |
LX Retrofit
Trim |
|
| Add "-RE"
to model number as electric release option. |
|
| |
|
| Electrically-Released
Trim Goes Into Fail-Safe Mode On Both Sides Of The Door
With Loss Of Power Or Signal From Fire Alarm System |
| • |
Electric release
in the trim, not the strike insures easy installation |
| • |
Eliminates
failures due to door misalignment (sagging) |
| • |
No moving
parts in the strike plate to wear out |
| • |
Available
in Maglatch, Electrolatch, Auto-Bolt Maglatch & Electrolatch
Panic & LX Series trim |
| • |
Vandal-resistant
LeverEx™ slip-clutch within stainless steel exterior
lever handle breaks away when forced without damage |
| • |
Code compliant
release action meets ADA requirements |
| • |
Works with
all access control & intercom systems |
| • |
Patented quick-switch
cylinder change method and removable spindle for easy service
(UG style trim) |
| • |
Lever movement
restrictors prolong life of mortise lock by reducing wear
& tear |
| • |
Ideal for
Office building stairwells
Special code requirement locations |
| |
DOOR &
FRAME PREPARATION:
Standard 1 ¼" x 8" mortise prep for door.
Standard 4 7/8" strike prep for frame.
Wire chase required for wood doors.
HANDING: LH, RH, LHR, RHR
CYLINDER: Mortise cylinder required (by others)
WIRING: 2-4 wires
transferred from frame to door, power transfer options include
electrified hinge, Yamaka, TransX, power cord, etc.
Wiring to the strike
area is NOT required. |
|
