Signal Lock Information
Signal Lock Wiring Information
Signal lock wiring travels from the access control or alarm system to the door frame, through a power transfer (hinge, door cord, etc.) and through the door to the interior trim, exterior trim and lock body, as needed.
Interior
Exterior
Interior Trim
Exterior Trim
Mortise Lock
R-T-E Signal
Optional Wires:
Mag Lock
Release
2nd R-T-E
Signal
2
2
2
Electric Release
Optional Wires:
Mag Lock Release
Key Usage Switch
2
2
2
Standard Model
Optional Wires:
Latch Position Switch
0

2
The switch is located within the trim. Movement of the lever activates the switch as the latch is retracted - "No Special Knowledge" or action is required for "Request-To-Exit".
Signal trim typically provides fail-safe exiting at all times and fail-secure entry. Re-entry models may be used to meet stairwell and code requirements.
Signal lock mortise lock models begin with the "SM" designation. All feature interior R-T-E switch and exterior electric release. "E" designates Electrolatch function. "M" designates Maglatch function. The most popular switch combinations are listed in the chart on the opposite side. Additional designating info is located below.

Trim Style

 
U
UG
•
 Heavy-duty
•
 Slip-Clutch vandal-resistant lever
•
 Optional electric release & magnetic lock control

 
G
GG
•
 Narrow-style aesthetic design
•
 UG features and options

 
L
LR
•
 Narrow-style
•
 Optional electric release
•
 No slip-clutch


Electric Release Options
A
 AC (24vAC, 30va)
D
 DC (24vDC, low ¼ Amp draw)
R
 Re-Entry (Fail-Safe exterior lever) DC solenoid info
M
 Mechanical only (no electric)

Exterior Trim Functions
S
 AC (24vAC, 30va)
C
 Classroom
P
 Passage
D
 Dummy
K
 Key usage switch (Single entry function)
X
 Access control cut-off switch (Single entry function)

See "Trim Styles" catalog in electric locking section for full trim features, details, sizes and options
Finishes
UG & LR
676 (Powder Coat Black)
GG
630 or 605
Other finishes on special request

Handing
LH, LHR, RH or RHR
Trims are not field reversible

Special Options
-L
 8' Long lead wires
-LSS
 Provides signal on lever status.
Identifies if lever is locked.
Useful for remote monitoring.
-TD
 Thick Door (Over 1 ¾").
Special fasteners and longer spindles. Specify thickness.
CYLINDER INFORMATION:
Securitech does not provide cylinders for use with LX trim. Standard 1 1/8" to 1 ¼" cylinders may be used. Contact factory with other requirements.
CAM INFORMATION
S & K: Clover (Wing-Type)
C: "Adams-Rite" (short)
X: Straight "Yale"
Mortise Lock Body
Standard 3 hour fire-rated mortise lock is provided. Other manufacturer's lock bodies may be used to match a project's needs. Contact factory.