|
Maglatch™
Additional
Features &
Custom Models |
| Removable
Spindle |
| |
Replacing
a vandalized mortise lock can be accomplished quickly
and easily without removing the trim from the door.
The round cap on the interior lever may be removed
via a special allen key. The spindle can then be
pulled out, which allows the lockset to be replaced. |
| UG
Trim
Only |
| Quick-Switch
Cylinder Protector |
| |
Changing
a cylinder also does not require moving the trim
from the door. An access hole in the interior trim
allows an allen key to be inserted into the cylinder
locking post of the exterior trim. The locking post
can be turned, which releases the cylinder and allows
the switch. |
| UG
Trim
Only |
| MagChannel |
| |
For
use on inswing doors, MagChannel allows installation
of the electro-magnetic lock without unsightly "Z"
brackets. |
| Custom
Electromagnetic Locks |
| |
 |
| MAGLATCH
can work with existing or new electromagnetic locks.
MAGLATCH models, which include an electromagnetic
clock, are furnished with a slim design 1,200 lb.
Holding force magnet and armature. Custom electromagnetic
locks can be furnished with options such as "Bond
Sensors" and "Door Status Sensor" to
meet access control system needs. Contact factory
for details. |
|
| Only
Securitech offers this wide an array of features
and options |
| Load
Bearing Switches |
| |
Both
the interior and exterior levers contain independent
switches, rated at 5 Amps, 30vDC. |
| These
can interrupt the electro-magnetic lock's power and
have a mechanical life of 10 million cycles. Depressing
the lever opens the circuit. |
| Exit
Devices |
| A
full range of exit devices, including trim, mortise,
surface vertical rod |
 |
| and
concealed
vertical rod
models are available.
See High-Security Exit Device Section for catalog
cut. |
| Power
Supplies |
| |
Securitech
offers a full range of power supplies for the MAGLATCH
system. Custom requests can be accommodated. See
the full catalog cut. |
| Special Elements |
|
KU |
-Key
Usage Signal Switch |
|
| For use
with access control systems. Sends a signal to the
access control system that a key was used for entry
as opposed to the access control card. |
|
LL |
-8'
Lead Length For Easy
-Wiring |
|
| Eliminates
wiring connections in the lock area of the door. |
|
